B.1 Accessories; Bus Connection - Festo VIFB11-02 Series Manual

VIFB11 - 02 Appendix B

B.1 ACCESSORIES

This section gives a summary of the acces-
sories required.
PLEASE NOTE
The following summaries do not claim to be
complete. The addresses of the suppliers
named can be found at the end of the section.

Bus connection

The bus must be connected via a branch line
by means of a 5-pin M12 socket with PG9
screw connector. These connectors can be
ordered from Festo (type: FBSD-GD-9-5POL,
part no. 18324).
Alternatively, you can use bus cables (drop
cable, M12 / 7/8") from the following manufac-
turers:
Manufacturer
Lumberg
Turck
*) Length in metres
9911e
Type
RS50 RKT5-614/1.5F
RS50 RKT5-614/3F
RS50 RKT5-614/6F
RS50 RKT5-614/9F
RSM 572-*M-RKC 4.5T/S633
RSM 572-*M-RKC 4.5T/S630
Length
1.5 F
3.0 F
6.0 F
9.0 F
x m
x m
B-3