Configuration - Festo VIFB11-02 Series Manual

VIFB11 - 02
5-16
5. Commissioning

Configuration

Calculate first the number of input and output
bytes.
PLEASE NOTE
The valve sensor terminal makes available 2
status bits. The 2 inputs supply status informa-
tion with which internal error messages are
coded and transmitted to the DLC 100/200.
You can compare the calculated number of
bus slaves and the calculated number of input
and output bytes with the number calculated by
the DLC 100/200.
When you presss the "CONF" key, the follow-
ing will appear in the seven segment display:
•
the number of recognized network modules
(e.g. valve terminals)
•
the number of input bytes
•
the number of output bytes
Enter the calculated number of input and output
bytes (+ if necessary with reserves for exten-
sions) in the mask "Resource hardware -
input/output modules".
9902d