Using The Weigh System; Prior To Weighing - Cascade C Series User Manual

USING THE WEIGH SYSTEM

WARNING: Operators (Drivers) must read
and understand this manual before being
allowed to operate this equipment. If the
operator does not understand any part of the
User Manual a supervisor should be asked for an
explanation. If it is still not understood, this equipment
should not be used.
WARNING: The C-Series Weigh Forks are to be
operated by a qualified operator only. Overloading, load
positioning, load stability, load security and unqualified
operators can result in a hazardous situation.
NOTE: The forks are factory calibrated and ready to use.
Legal for Trade models are factory calibrated and ready
to use. Additional certification is required by a local
weights and measures authority.

Prior To Weighing

Verify the indicator shows
zero. If necessary, press the
"Zero" button.
Working Temperature Range:
-4° F (-20° C) minimum
105° F (40° C) maximum
8305557-R2
WARNING: Residual risk exists to pedestrians,
bystanders and service technicians in the work area.
Operate lift trucks and accessory equipment in a safe
working area and in compliance with facility, local and
national standards and rules.
WARNING: Before operating, perform the Daily
Inspection as described in this manual
Verify forks are free of
obstacles prior to zeroing
Position to vertical
Legal for Trade Certified:
±5% (3°) Horizontal
FK0550.eps
Level load to
Horizontal
11