Indicator Messages - Cascade C Series User Manual

USING INDICATOR

Indicator Messages

Error Message
FK0549.eps
10
Meaning
Forks are overloaded
Weight on scale is negative or load cell
signal is negative
Problem with Fork 1, no communication
Problem with Fork 2, no communication
Forks not detected
To Exit Error Mode
Automatic after removing weight
Press the ZERO/OFF key.
Lift the forks from the ground.
Verify weigh system is powered ON
and forks are in range of the indicator.
Restart indicator.
Restart forks and indicator.
Verify weigh system is powered ON
and forks are in range of the indicator.
Restart indicator.
Restart forks and indicator.
Verify weigh system is powered ON
and forks are in range of the indicator.
Restart indicator.
Restart forks and indicator.
8305557-R2