Advertisement
機器如何安裝
1. 依本機器所附桌板裁製圖及零件組合圖所列
之配件，依序安裝防震機座及線架。( 圖 1.2)
2. 馬達之轉向為順時針方向 , 皮帶之鬆緊度以
用手指能向內壓 20mm 為宜 , 同時為安全起
見請皮帶蓋必須鎖上。( 圖 3.4)
3. 皮帶輪及縫合轉速，請參照 ( 表 1)。
P8
INSTALLATION OF MACHINE
圖 1/Fig 1
1.With reference to diagrams for table cutting
and mounting parts list, install rubber
cushion and thread stand in sequence.
(Fig. 1.2)
圖 3/Fig 3
2.Motor should turn clockwise with proper
tension for driving belt. It can be checked by
pushing belt inward for 20mm. Please install
belt cover properly for safety purpose.
(Fig. 3. 4)
3.Motor pulley size and sewing speed, please
refer to (Table 1).
圖 2/Fig 2
圖 4/Fig 4
Advertisement
