Chapter 9 Pass/Fail Test - Rigol DS2000E Series User Manual

Chapter 9 Pass/Fail Test

Chapter 9 Pass/Fail Test
During the product design and manufacturing process, you usually need to monitor
the change of the signal or judge whether the product is up to standard. The
pass/fail test function of the DS2000E oscilloscope can fulfill this task perfectly.
The contents of this chapter:
To Enable Pass/Fail Test

To Select Source

Mask Range

To Set Test Results Output Type

To Save the Test Mask

To Load the Test Mask

DS2000E User's Guide
RIGOL
9-1