Rigol DS2000E Series User Manual page 50

RIGOL
Note: The following arrow keys might appear in the grid at the lower-left
corner of the operation menu:
Indicates that you can open the next page of the menu.
Indicates that you can open the previous page of the menu.
13. Notification Area
Display the system time, sound icon, and USB storage device icon and PictBridge
printer icon.
System Time

Displayed in "hh:mm (hour:minute)" format. When printing or storing
the waveform, the output file will contain this time message. Press
Utility  System  System Time  System Time to set in the
following format: yyyy-mm-dd hh:mm:ss (year-month-date
hour:minute:second)
Sound Icon

When the sound is enabled,
enable or disable the sound.
USB Storage Device Icon

When a USB storage device is detected,
PictBridge Printer Icon

When a PictBridge printer is correctly connected to the oscilloscope,
be displayed in this area.
14. Message Box
Display the prompt messages.
15. CH2 Vertical Scale
Display the on/off status of CH2 and the voltage value per grid of CH2 waveform
vertically. In addition, the following labels will be displayed according to the
current channel setting: channel coupling (e.g.
and bandwidth limit (e.g.
parameter.
16. CH1 Vertical Scale
Display the on/off status of CH1 and the voltage value per grid of CH1 waveform
vertically. In addition, the following labels will be displayed according to the
current channel setting: channel coupling (e.g.
1-22
will be displayed. Press Utility  Sound to
). You can use VIRTICAL
Chapter 1 Quick Start
will be displayed.
), input impedance (e.g.
SCALE to modify this
), input impedance (e.g.
DS2000E User's Guide
will
)
)