Table of Contents
Advertisement
RIGOL
time.
Press Footer to enable or disable the footer function. When it is enabled, the
footer would display the serial number of the instrument.
Tip
After a USB storage device is connected, press
quickly save the current screen image under the root directory of the USB
storage device.
5. CSV
Save the waveform data displayed on the screen or of the specified channels in
external memory in a single "*.csv" file. You can specify the file name and the
saving directory and save the corresponding parameter file (*.txt) under the
same directory using the same file name. The recall of CSV and parameter files
is not supported.
After selecting this type:
Press DataDepth to select "Displayed" or "Maximum". After selecting
"Maximum", press Channel to select the desired channel (Note: Only currently
enabled channels can be selected).
Press Para.Save to enable or disable the parameter save function.
Press Sequence to select whether to add sequence numbers for the waveform
points in the CSV file. You can select "ON" or "OFF".
12-4
Chapter 12 Store and Recall
on the front panel to
DS2000E User's Guide
Advertisement
Table of Contents
