Document Overview - Rigol DS2000E Series User Manual

RIGOL

Document Overview

Main Topics of this Manual:
Chapter 1 Quick Start
Chapter 2 To Set the Vertical System
Chapter 3 To Set the Horizontal
System
Chapter 4 To Set the Sample System
Chapter 5 To Trigger the Oscilloscope Introduces the trigger mode, trigger
Chapter 6 MATH and Measurements
Chapter 7 Protocol Decoding
Chapter 8 Reference Waveform
Chapter 9 Pass/Fail Test
Chapter 10 Waveform Record
Chapter 11 Display Control
Chapter 12 Store and Recall
Chapter 13 System Function Setting
Chapter 14 Remote Control
Chapter 15 Troubleshooting
Chapter 16 Specifications
Chapter 17 Appendix
XVIII
Introduces the preparations before using the
oscilloscope and provides a basic
introduction of the instrument.
Introduces the vertical system functions of
the oscilloscope.
Introduces the horizontal system functions
of the oscilloscope.
Introduces the sample system functions of
the oscilloscope.
coupling, trigger holdoff, trigger source, and
various trigger types of the oscilloscope.
Introduces how to make math operation,
cursor measurement, and auto
measurement.
Introduces how to decode the input signal by
using those common protocols.
Introduces how to compare the input
waveform with the reference waveform.
Introduces how to monitor the input signal
by using the Pass/Fail test.
Introduces how to record waveforms, play
back, and analyze the recorded waveforms.
Introduces how to control the display of the
oscilloscope.
Introduces how to store and recall the setup
file, the waveform file, etc.
Introduces how to set the remote interfaces
and system-related functions.
Introduces how to control the oscilloscope
remotely.
Introduces how to deal with the common
failures of the oscilloscope.
Provides the technical specifications and
general specifications of the oscilloscope.
Provides the basic information for the
options and accessories.
DS2000E User's Guide