Parameter Settings In Acs - Siemens RDG400KN Basic Documentation
Room thermostat with knx communications
Hide thumbs
Also See for RDG400KN:
- Basic documentation (87 pages) ,
- Manual (14 pages) ,
- Operating instructions (2 pages)
Table of Contents
Advertisement
Siemens
Building Technologies
5.2.1
Parameter settings in ACS
In the ACS Service program, select Plant, then Open to open the plant.
To start the parameter settings, select Applications, then Parameter settings...:
The application and control parameters can be adjusted and downloaded.
Column Line no. contains the parameter number as shown in the parameter table.
Refer to section 3.11, control parameters.
RDG400KN Basic documentation
Supported KNX tools
69 / 78
CE1P3192en
20 Jul 2010
Advertisement
Table of Contents
