Control Outputs Configuration (Setting Via Dip Switches Or Modbus Commissioning Tool) - Siemens RDF302 Documentation

Plant type
Siemens
Building Technologies
3.7.2 Control outputs configuration (setting via DIP switches
or Modbus commissioning tool)
For the control outputs of a 2-pipe application, either On/Off or 3-position can be
set via DIP switches or via Modbus commissioning tool (see section 3.4). Other
applications, e.g. 4-pipe and 2-pipe with electric heater, only have On/Off type of
outputs.
The application and control output can be changed between On/Off and 3-position
via Modbus.
RDF302 Basic documentation
31 / 58
CE1P3079en
07 Dec 2011