Clearing Misfeeds - Ricoh FT8982 Operating Instructions Manual

WARNING: Since some parts of the copier are supplied with high elec-
trical voltage, touch only the parts specified in the instruc-
tions on the stickers inside the machine's cover.
WARNING: When removing misfed paper from sections H and I, use
caution. The fusing unit may be very hot.
the position of the fusing unit.
CAUTION: Do not leave any torn scraps of paper in the machine.
NOTE: When clearing misfeeds, do not turn off the main switch. If you do,
your copy settings will be cleared.
NOTE: After clearing misfeeds, make sure that all units and levers are re-
turned to their original positions and all covers are closed.
NOTE: Do not touch originals in the document feeder when a paper mis-
feed occurs in the copier. If you do, the copier cannot determine
which originals have been copied, and which haven't.
Check The Misfeed Location Display
The display shows the location of
misfed paper.

CLEARING MISFEEDS

CLEARING MISFEEDS
See page 4 for
109