EDITING THE COPY IMAGE (Edit Image)
Select each erase width of the Center and erase width of surrounding
area following the instructions on the display.
You can select the center margin width as follows:
Metric version:
Inch version:
You can select the edge margins width as follows:
Metric version:
Inch version:
If you set Full image mode (
Set your originals on the exposure glass or in the document feeder.
Press the Start key.
Merging Images (Overlay)
Save Area
Touch the [Edit Image] key.
Touch the [Overlay] key.
Set required setting for original 1
(original that will be fed first) and
original 2 (original that will be fed
the second time).
Touch the [#] key.
70
0 mm, 15 mm, 25 mm, 35 mm
0", 0.6", 1.0", 1.4"
2 mm, 7 mm, 12 mm, 17 mm, 22 mm
0.1", 0.3", 0.5", 0.7", 0.9"
see page 121), you can select 0 mm, or 0".
Save Area