Table of Contents
Advertisement
TROUBLESHOOTING
Clearing Misfeeds
When there is a paper misfeed, a misfeed location number (PE, J0, J1, or J2 )
is displayed in the copy counter. If J0, J1 or J2 is displayed, the Check Paper
Path (
) indicator will also light. Remove misfed paper as follows.
F
Do not leave any torn scraps of paper within the copier.
F
After removing the misfed paper, make sure that all units are returned to their original
positions and the top unit and front cover are closed.
F
When a paper misfeed occurs, the copier keeps track of the selected copy modes and
how many originals have been completed. It is not necessary to reset the copy modes
and the copy quantity after removing misfed paper.
F
Repeat the procedures described in this section until the Check Paper Path indicator
and misfeed location number (PE, J0, J1, or J2) go out. (The indicators do not function
unless the front cover is closed.)
F
Do not open the front cover after the misfeed condition is cleared. (The copier's mem-
ory will be erased if you do.)
F
If you have a document feeder, make sure to use the top unit stand to keep the top unit
open.
24
TROUBLESHOOTING
PE: See page 25.
J1: See page 27.
J2: See page 28.
J0: See page 31.
Clearing Misfeeds
*Illustration shows type 2.
Advertisement
Table of Contents
Troubleshooting
