If You Cannot Make Copies As You Want - Ricoh FT8982 Operating Instructions Manual

IF YOU CANNOT MAKE COPIES AS YOU WANT

IF YOU CANNOT MAKE COPIES AS YOU
Problem
Copies appear dirty.
The reverse side of an
original image is copied.
Copies are too light.
The same copy area is
dirty whenever making
copies.
Copies are blank or
parts of the image are
not copied.
If you cannot correct the problem by taking the above actions, please contact
your service representative.
100
Cause
The original has a gray or
colored background.
The image density is too dark.
The exposure glass, or
document feeder belt is dirty.
The image density is too dark.
The original has a low
contrast image.
The image density is too light.
Damp or rough grain paper is
used.
The exposure glass, or
document feeder belt is dirty.
The original is not set correctly.
An improper paper size is
selected.
Action
Adjust the image density.
See page 40.
Clean them.
See pages 132 and 133.
Adjust the image density.
See page 40.
Adjust the image density.
See page 40.
Use dry paper without rough
grain.
Clean them.
See pages 132 and 133.
Set originals correctly.
See page 28, 29, or 31.
Select the proper paper size.
WANT