Service Representative Setting - Ricoh FT8982 Operating Instructions Manual

Some features can be adjusted by your service representative to suit your
needs. This section gives a brief description of these features. For more
information, contact your service representative.
Special Paper Size Set
If you want to use the following sizes in the 1,700-sheet tray (Tray 3),
contact your service representative.
Metric version:
Inch version:
Display
Your service representative can set the copier to display [Paper Tray
Select] keys in Auto Paper Select mode.
Copy Counter Up/Down
You can select whether the copy counter on the display adds one for each
copy (counter up) or the copy counter subtract one for each copy (counter
down.)
Tray Priority
You can select the tray that is selected when the Auto Paper Select is
canceled and the copier is in the Interrupt Copying mode.
As a default setting, the tray priority is as follows:
Optional large capacity tray (Tray T)
OR
1,700-sheet tray (Tray 3)
(*if your machine is not equipped with the optional large capacity tray.)

SERVICE REPRESENTATIVE SETTING

B4 :, A4 :, 8 " x 11" :, 8
1/2
8 " x 14" :, 8 " x 11" :, A4 :
1/2 1/2
SERVICE REPRESENTATIVE SETTING
" x 14" :
1/2
129