ADDING OR INSERTING SHEETS (Cover/Slip Sheet )
Adding A Front Cover Sheet
Note: Before using the following functions, set the special paper tray
for cover sheets using the User Tools.
Note: Before using the following functions, you should change the set-
ting to add a blank cover sheet using the User Tools.
page 121.
Note: This function can be used only when you set a stack of originals
in the document feeder.
A Paper tray for normal paper and a paper tray for cover sheets of identical
size and direction are required for this function.
When you make more than one set of copies, select optional Sort mode.
Make sure that the cover sheets are set in the special paper tray for
cover sheets.
Touch the [Cover/Slip Sheet]
key.
Make sure that the [Front] key is
selected. Then, touch the [#] key.
Set your originals in the document feeder.
Press the Start key.
76
See page 119.
See