Ricoh FT8982 Operating Instructions Manual page 107

Copier's condition
The Start key does not change
from red to green after the main
switch is turned on or the ma-
chine stops during a copy run.
The display instructs you to set
the key counter or key card.
The display instructs you to enter
your user code.
The copier is off by the Weekly
timer and the display instructs
you to enter the access code.
and messages are displayed. Follow the instructions on the display.
Misfeeds occur frequently.
If you cannot correct the problem by taking the above actions, please contact
your service representative.
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
Check the touch panel display, and follow the
instructions. If you have to press the reset button,
open the front cover. The reset button is located
inside as shown in the illustration.
Set the key counter or key card.
The copier is set for Accounting mode. Enter your
user code. See page 127.
Enter the access code.
Is the right kind of paper in the paper tray?
Paper size and weight must be within the
specifications for this copier.
Is folded, wrinkled, damp, or curled paper in the
paper tray?
Always use dry, undamaged paper.
Is the paper properly set in the paper tray?
Always load paper correctly.
Are there any pieces of misfed paper or other foreign
objects in the machine?
Make sure that the paper path is completely
clear of paper and other material after a misfeed.
Action
See page 124.
99