When The Touch Panel Display Is Off
The copier is in Screen Saver mode.
Stand in front of the auto response sensor to return to the ready condition.
For details about Screen Saver,
The following actions will also make the copier ready:
• Opening the document feeder.
• Opening the front cover.
• Touching the touch panel display.
• Pressing any key on the operation panel.
• Setting originals in the document feeder.
• Pressing the Down key of the paper trays.
When The Copier Is Set For User Codes
Input your user code (6 digits)
using the 10 keys. Press the Re-
call/Enter key.
To prevent others from making cop-
ies using your user code, press the
Clear/Stop and Clear Modes key si-
multaneously after copying.
For details about user codes,
page 127.
If you input the wrong user code,
press the Clear/Stop key and input
the code again.
see page 117.
see
STARTING THE COPIER
21