Ricoh FT8982 Operating Instructions Manual page 74

EDITING THE COPY IMAGE (Edit Image)
EDITING THE COPY IMAGE (Edit Image)
Regarding functions that cannot be used together with this function,
page 94.
Erasing Part Of Original Image
Maximum erase area: Metric version:
Saving part of original image (Save Area)
When making copies after designating the area, set the original on the expo-
sure glass or in the document feeder as shown in the illustrations.
The designated line will vary by ± 5 mm or 0.2". Therefore, leave at least 5 mm
or 0.2" between the designated line and the image. If this clearance is narrower
than 5 mm or 0.2", an undesired area might be deleted or saved.
66
Inch version:
X1, X2:30 cm
Y1, Y2:44 cm
X1, X2:11.82"
Y1, Y2:17.32"
see