Ricoh FT8982 Operating Instructions Manual page 132

USER TOOLS
6. Set date/time
Use to set the copier's internal clock before setting the weekly timer. Set the clock follow-
ing the touch panel display instructions.
The clock must be adjusted if you change the clock to daylight saving time/summer time,
or return it to standard time.
To change the number entered;
• Before touching the [#] key, press the Clear/Stop key.
• After touching the [#] key, touch the key which number you want to change.
7. Weekly timer
Use to set the weekly timer. If you set the timer, the copier turns on and off at the se-
lected time each day. Also, you should register an access code that is needed to turn on
the machine after the machine is turned off by the weekly timer.
You should input the ON time and OFF time for each day.
If you want to turn on the machine for an entire day, input "000" for the ON time and do
not input the OFF time.
If you want to turn off the machine for an entire day (ex.: Saturday, Sunday), do not input
the ON time and input "000" for the OFF time.
You should input time in 24 hour time cycles (ex.: not 8:00 pm but 20:00)
To change the number entered;
• Before touching the [#] key, press the Clear/Stop key.
• After touching the [#] key, touch the key which number you want to change.
If you turn off the main switch or unplug the power cord, the weekly timer does not come
effect.
124