Vertical mounting/ portrait mounting
The interfaces facing towards the front. The power supply connection is at the top.
7.3
DIN rail mounting
7.3.1
Attaching the DIN rail bracket
Before you can install the device on a DIN rail, you will need to attach the DIN rail clip to the
device.
The fasteners and screws required are supplied with the device for the selected mounting
option (as specified in order number).
Requirement
● 1 DIN rail clip
● 4 screws
● 1 T20 screwdriver
MCU 1720
Equipment Manual, 09/2019, A5E47437728B AB
Installation
7.3 DIN rail mounting
51