Installing/Removal; Installing The 3Ra61/3Ra62 Compact Starter; Mounting The Compact Starter On A Din Rail - Siemens SIRIUS 3RA6 System Manual

5.4

Installing/removal

5.4.1

Installing the 3RA61/3RA62 compact starter

The sections below explain how to install the SIRIUS 3RA6 compact starter on:
● A standard mounting rail
● A level surface (screw fastening)
● The infeed system for 3RA6
5.4.1.1

Mounting the compact starter on a DIN rail

Requirements
● A 35-mm standard mounting rail in accordance with IEC / EN 60715 must be properly
secured at the installation location.
● Please remember to observe the information on minimum distances in "Dimension
drawings (Page 267)".
Procedure
Step
1
2
3
SIRIUS 3RA6 compact starter
System Manual, 09/2014, NEB560060102000/RS-AA/006
Instructions
Place the back of the device onto
the upper edge of the standard
mounting rail.
Press the lower half of the device
against the rail until you hear the
device engage.
Release the actuator.
3RA61/3RA62 compact starter
Image
5.4 Installing/removal
63