Table of Contents
Advertisement
Description
4.1 Characteristics
Application areas and performance
On the MCU, the number of axes and/or the performance of the drive control can be increased
to 8 axes by using the MC technology objects. This is achieved by using the CU320.
The following table lists the key characteristics and features of the MCU 1720:
Characteristics
Basic data
Mounting
Processor
Main memory
Graphic
Power supply
Axes
Drives
Channels
Mode groups (BAG)
Drives and storage media
SSD (solid state disk)
USB Stick
Interfaces
Graphic
USB
Ethernet
PROFINET
Keyboard, mouse
24
● Attachment to DIN rail (horizontal mounting position)
● Portrait mounting (vertical mounting position)
Intel® Core™ i5-6442EQ processor (6M cache, up to 2.7 GHz)
8 GB DDR4-SDRAM SODIMM
● Intel® HD graphics 530
● 2 x DisplayPorts, maximum resolution 4096 x 2304 pixels
● Graphics memory is located in the main memory (dynamic UMA)
X80: 24 V DC (-15%/+20%) max. 5 A
X142/X152: 24 V DC (-15%/+20%) max. 2 A
● Max. 8 CNC axes
● SIMATIC S7 Motion Control technology objects up to max. 2400
resources
● SINAMICS EPOS axes in regards to I/O addresses and
performance
● Max. 8 drives for CNC axes
● Max. 20 drives, controlled by SIMATIC S7 Motion Control
technology objects
4
1
2.5", ≥ 240 GB SATA
Can be externally connected via USB interface
2 x DisplayPorts DPP (DVI via DP++ to DVI adapter possible)
6 × USB 3.0, max. 2 high current, can be operated simultaneously,
downwardly compatible to USB 2.0/1.1
4 × RJ45 (10/100/1000 Mbit/s) teaming-capable
3 x RJ45 (10/100 Mbit/s) teaming-capable
Can be connected via USB interface
Equipment Manual, 09/2019, A5E47437728B AB
MCU 1720
Advertisement
Table of Contents
