Installing And Removing Cfast Cards - Siemens SINUMERIK MCU1720 Equipment Manual

Mounting
Install the device by following the same steps in the reverse order.
11.2

Installing and removing CFast cards

The device has a slot for a CFast card on the side with the interfaces. Always use SIMATIC IPC
CFast cards for industrial applications.
NOTICE
Damage to the device
The CFast and CompactFlash connections are not compatible.
Use the slot described here only for a CFast card; otherwise, the device will be damaged.
Requirement
● The device is switched off.
● SIMATIC IPC CFast card that is approved for industrial applications.
Procedure
Installation
NOTICE
Inserting a memory card
If you are using the memory card in a device installed in a system, you must observe the safety
regulations for work on electrical systems.
Insert the CFast card into the slot, working carefully and without applying excess force.
1. Release the lock of the cover.
2. Open the cover completely.
3. Insert the CFast card into the memory card slot.
MCU 1720
Equipment Manual, 09/2019, A5E47437728B AB
Spare parts/accessories
11.2 Installing and removing CFast cards
93