Table of Contents
Advertisement
Connecting
8.3 Communication services and used port numbers
Interface overview
Table 8-1
Overview of the interfaces that can be used
Interface
Connector type
X142, X152
2x 7-pole spring-loaded terminals
X127, port 1
Industrial Ethernet
RJ45 10/100/1000 Mbps
X130, port 1
Not suitable for PoE
X150, port 1
PROFINET iRT PLC1500F
RJ45 10/100/1 000 Mbps
X150, port 2
X160, port 1
PROFINET RT
RJ45 10/100/1000 Mbps
X125, X135
Double SuperSpeed, type A socket
X140
DisplayPort socket
X55
SD standard slot
X1, port 1
Industrial Ethernet PN/IE
RJ45 10/100/1000 Mbps
X2, port 1
Not suitable for PoE
X70
DisplayPort socket
X71
DP V1.2/DP++
X60, X61, X62, X63
2x Double SuperSpeed, type A socket
X50
CFast standard slot
X80
2-pole screw-type terminal
1) The X140 interface is designed for service purposes only and cannot be used to connect a display.
8.3
Communication services and used port numbers
SINUMERIK supports the protocols listed in the following tables. The address parameters, the
relevant communication layer as well as the communication role and the communication
direction are specified for each protocol.
This information allows you to match the security measures for the protection of the automation
system to the used protocols (e.g. firewall).
The following table shows a section of the various layers and protocols that are used.
60
Use
Each with 4 digital inputs/outputs of the NC
Incl. 24 V DC power supply for I/O
Commissioning and remote diagnostics of the NC
Connecting the MCU to the company network
SIMATIC PROFINET IO, PN I/O;
(Integrated 2-position switch)
SINAMICS S120, S210
USB devices for NC/PLC
Service Interface
1)
SD Card NC/PLC
Windows network
Factory network
Connection of the operator panel fronts for use under Win‐
dows
USB devices for Windows
CFast Card (Windows)
24 V DC power supply for computing unit
Equipment Manual, 09/2019, A5E47437728B AB
MCU 1720
Advertisement
Table of Contents
