Mounting On Din Rails - Siemens SINUMERIK MCU1720 Equipment Manual

Installation
7.3 DIN rail mounting
Procedure
1. Fasten the DIN rail clip with four screws.
7.3.2

Mounting on DIN rails

Requirement
● DIN rail, 35 mm standard profile
The DIN rail is installed at the installation site.
Note
Ensure that the wall or ceiling can bear four times the total weight of the device including the
standard mounting rail. See Safety instructions (Page 45).
52
Equipment Manual, 09/2019, A5E47437728B AB
MCU 1720