Standard Rail Mounting And Vertical Mounting; Standard Rail Mounting - Siemens SIMOTION P320-4 E Manual

Vertical mounting
The following vertical mounting option is permitted:
The interfaces are at the front. The power sup‐
ply connection is at the top.
You can find information on mounting under Vertical mounting (Page 67).
Ambient conditions
Observe the permissible temperature range for operation in the respective mounting position
as described in Section "Technical data > Ambient conditions (Page 90)".
5.2.1

Standard rail mounting and vertical mounting

5.2.1.1

Standard rail mounting

Requirement
● Standard mounting rail, 35 mm standard profile
The standard mounting rail is installed at the installation site.
● The standard mounting rail clip is attached to the SIMOTION P320-4.
Note
Ensure that the wall or ceiling can hold four times the total weight of the SIMOTION P320-4
including the standard mounting rail and additional expansion cards. See section Notes on
installation (Page 69).
SIMOTION P320-4 E / P320-4 S
Manual, 01/2015
Installation/mounting
5.2 Permissible mounting positions
65