Table of Contents
Advertisement
PowerBoot
ipmi_info
D
ESCRIPTION
S
YNTAX
P
ARAMETERS
E
XAMPLE
md
D
ESCRIPTION
S
YNTAX
P
ARAMETERS
address
size
PPC/CPCI-690
Command to display information on the on-board IPMI controller.
ipmi_info
None
PowerBoot> ipmi_info
IPMI-Informations
Device-ID: 1
Device-Revision: 1
Firmware-Revision: 0.9
IPMI-Version: 1
Geographical Addr: 0x1
IPMI-I2C_Addr: 0x20
IPMI-Role: 0
PowerBoot>
This command displays the memory contents. The data is displayed in
hexadecimal notation and ASCII code. If the data cannot be displayed in
ASCII code, a full stop is displayed instead.
The memory contents are displayed in blocks of 16 lines, each block repre-
senting 16 byte. If you want to display the next block of lines press <Enter>.
If you want to return to the command line, enter the full stop (.) character.
md <address> [<size>]
First byte which is read in order to display the memory contents.
Specifies the memory access size
Command Set
4 - 33
Advertisement
Table of Contents
