JUKI KE-750 Setup Manual page 6

(1) Lift the adjuster !0 to bring the casters o into contact with the floor before
installing or moving the main unit.
(2) When using a forklift to mov e the main unit, be sure to put the fork under the
bottom of the main unit from the front side, then lift and mov e it after the fork
protrudes enough from the rear of the main unit.
when you use a pallet truck to move the machine.)
! CAUTION
(1) Make sure of the center mark when moving the machine with a
forklift (pallet truck).
(2) Do not use a forklift (pallet truck) to move the machine with a vision
monitor w and signal light t attached.
- -
3
(Follow this instruction also