JUKI KE-750 Setup Manual page 14

(3) Keyboard Bracket Assembly
a) Fix the keyboard connecting plate of the keyboard bracket assembly on the main
unit with four stopper screws as shown in Figure 7.5.
b ) Connect the keyboard cable to the keyboard connector located in the hole on the
right side of the cover FUR.
(4) HOD (Handheld Operating Device)
a) Connect the HOD cable to the HOD connector located on the right side of the
main unit.
(5) Hand knob
a) Hook the hand knob ov er the handle hook located on the front right of the main
unit.
(6) Feeder relay cable
Connect the feeder relay cable and air tube from the connector bracket to the
connectors on the main unit cov er (Perform this operation for the front and rear
sides).
! CAUTION
Keyboard
bracket
assembly
Keyboard connector
Connector
bracket
Figure 7 . 4
The connector bracket is already fixed on the replacement table
(optional).
HOD connector
Keyboard
connecting
-
11
Figure 7 . 5
-
Keyboard
bracket
assemblyplate
Stopper
screws (four)
(SM0040601SC)
Handle hook
Hand knob