Installation; Removal Of The Needle; Removal Of The Feed Bracket - JUKI 72005824 Installation Manual

IV. Installation
●CAUTION: To prevent accidents due to inadvertent activation, be sure to switch off the power before starting.
1. Removing the needle
❶

2. Removal of the feed bracket

❶
〇NOTE: Be careful not to generate a ball because
the metal ball is on top of the feed barrel.
1) Remove the set screw❷ to remove the
needle❶
❷
1) Remove the feed bracket❶ by loosening
the screw❷ and the washer❸
❷
❸
5Page