JUKI KE-750 Setup Manual page 54

! CAUTION
1) Select parts to be packed depending on the user.
2) This part is fixed on the main unit for Japan.
box. (Remove it from the main unit and pack it in the carton box if the
machine is to be exported abroad.)
3) Put air cap so that there cannot be any gap inside the carton box.
4) Paste the content labels on the outside of the carton box (two
positions)
PARTS NO.
PARTS NAME ACCESSORY
5) Remove the adjust nut 30 from the main unit, then pack it into the
supplied carton box.
6) The tie-up belt is used to fix the air tube which is piped at the factory
side.
* Refer to page 8 in the Set-up Guide.
-
KE750 or FP750
-
21
Do not pack it in the carton
Labels