JUKI KE-750 Setup Manual page 31

(2) Adjusting the Bank Stopper Fixing Position
Set the bank stopper in upper, middle, or lower position according to the board
transport height.
Board transport height
894 to 900
914 to 920 m m
887 to 893
907 to 913 m m
880 to 886
900 to 906 m m
(Add 50 mm when the machine is for ZEVA.)
!
CAUTION
Roller guide
Figure 11.6
Bank stopper fixing position
The position of the bank stopper above is just an example. Attach the
bank stopper where the trolley stopper plate touches more of the
bank stopper. The left fixing position may be different from the right
fixing position depending on the floor where the machine is installed.
Bank stopper
Trolley stopper plate
Figure 11.7
- -
28
Bank stopper
Lower
Middle
Upper