Table of Contents
Advertisement
Max power consumption: 890 W max
■
Max heat output: 3026 BTU/hr
■
Volt-Ampere rating: 908 VA @ 240 VAC, 0.98P.F.
■
ZS3-2 Acoustic Noise Emissions
In compliance with the requirements defined in ISO 7779, the workplace-dependent noise level
of this product is less than 70 db (A).
ZS3-2 Configuration Options
The ZS3-2 controller is an enterprise-class, rackmount x86 system powered by the Intel Xeon
processor. It provides high performance and room for growth with expandable PCIe slots and
16 DIMM slots in a compact 2U footprint. The following table describes the configuration
options.
CPU
Memory
2x8-core, 2.1
256GB
GHz
16x16GB
512GB
16x32GB
Refer to
http://oracle.com/zfsstorage
ZS3-2 Front Panel Components
The ZS3-2 controller drive slots and front panel components are shown in the following figure.
Readzilla
Boot Drive
1-4 SAS-2 SSDs
Two 2.5-inch
SAS-2 HDDs
for the most recent component specification.
Installation Prerequisites and Hardware Overviews
Overview of ZS3-2 Controller
PCIe Slots
HBA
Two dedicated;
4-port (4x4)
four available
SAS-2 6Gb/s
external
39
Advertisement
Table of Contents
