Power On Configuration (Jp2); Signal Connections - Advantech PCIE-1758 Series User Manual

Table 3.1: Board ID Settings (SW1)
14
15
Default setting = 0
3.3.2

Power On Configuration (JP2)

The default status of the PCIE-1758 series cards' digital output after a system power
on is OPEN to protect external devices from damage. JP2 determines whether the
last output value is retained after a hot system reset. Table 3.2 shows the jumper
positions for power on configuration.
Table 3.2: Power On Configuration After Hot Resets (JP2)
JP2
3.4

Signal Connections

Pin Assignments
The PCIE-1758 series cards feature two 100-pin connectors that allow users to inte-
grate accessories using a PCL-101100S shielded cable.
Figure 3.4 to 3.6 show the pin assignments of the I/O connectors on the PCIE-1758
series cards. The I/O connector signal descriptions are presented in Table 3.3.
PCIE-1758 Series User Manual
OFF OFF
OFF OFF
Power On Configuration After Hot Resets
Retain last status after hot reset
Default configuration (default setting)
OFF
OFF
14
ON
OFF