Switch And Jumper Settings; Board Id (Sw1) - Advantech PCIE-1758 Series User Manual

3.3

Switch and Jumper Settings

3.3.1

Board ID (SW1)

PCIE-1758 series cards feature a built-in DIP switch (SW1) that is used to define
each card's board ID. When multiple cards are installed on the same chassis, the
board ID switch is useful for identifying each card's device number. After installing
each card, users can differentiate them using their board ID. The available IDs and
their corresponding switch combinations are listed in Table 3.1. Refer to this table
when changing the ID to a non-zero number.
Table 3.1: Board ID Settings (SW1)
Board ID (dec)
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 3.3 PCIE-1758DO Card Layout
1 (ID3) 2 (ID2)
ON ON
ON ON
ON ON
ON ON
ON OFF
ON OFF
ON OFF
ON OFF
OFF ON
OFF ON
OFF ON
OFF ON
OFF OFF
OFF OFF
Switch Position
3 (ID1)
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
OFF
OFF
ON
ON
13 PCIE-1758 Series User Manual
4 (ID0)
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF