Power On Configuration(Jp1); Table 3.2:Power On Configuration After Hot Reset (Jp1); Channel-Freeze Function (Jp2); Table 3.3:Channel-Freeze Function Input Mode (Jp2) - Advantech PCIE-1752 User Manual

3.2.2 Power On Configuration(JP1)

Default configuration after power on, and hardware reset is to set all the
isolated output channels to open status (the current of the load can't be
sink) so that the external devices will not be damaged when the system
starts or resets. When the system is hot reset, then the status of isolated
digital output channels are selected by jumper JP1. Table 3.2 shows the
configuration of jumper JP1.
Table 3.2: Power on configuration after hot reset (JP1)
JP1

3.2.3 Channel-Freeze Function (JP2)

The PCIE-1752 provides the channel-freeze function for isolated digital
output channels. When Channel-Freeze function is enabled, all ports on
the card will be locked so that the data transmitted (from the host PC) to
the card won't be transferred to the DO ports. Once the Channel-Freeze
function is enabled, each port status is immediately frozen into its last
valid value before the Channel-Freeze. Since the value transmitted (from
the host PC) to the card is also stored in the buffers on PC, users can call
the relative function to read back the DO channel value, this function will
determine that:
• If Channel-Freeze function is disabled, it will return the DO value on
the port
• If Channel-Freeze function is enabled, it will return the value from the
buffers on host PC
Refer to Table 3.3 for setting dry/wet contact of Channel-Freeze function.
Table 3.3: Channel-Freeze Function Input Mode (JP2)
JP2
PCIE-1752 User Manual
Power on configuration after hot reset
Keep last status after hot reset
Default configuration (Default setting)
Power on configuration after hot reset
Channel-Freeze function dry contact input mode
Channel-Freeze function wet contact input mode
(Default setting)
20