Install the Open-Frame Rack Mounting Shelf
Before mounting the chassis in an open-frame rack, you must first install the open-frame rack mounting
shelf.
To install the open-frame rack mounting shelf (see
1. On the rear of each rack rail, partially insert a mounting screw into the highest hole specified in
Table 3 on page 12
for the open-frame rack mounting shelf.
2. Install the open-frame rack mounting shelf on the rack. Hang the shelf over the mounting screws by
using the keyhole slots located near the top of the shelf flanges.
3. Partially insert screws into the open holes in the flanges of the open-frame rack mounting shelf.
4. Tighten all the screws completely.
Figure 4: Installing the Mounting Hardware for an Open-Frame Rack
Figure 4 on page
13):
13