Install The Mounting Hardware In An Open-Frame Rack - Juniper MX960 Quick Start Manual

Figure 2: Mount Hardware for a Four-Post Rack or Cabinet

Install the Mounting Hardware in an Open-Frame Rack

To install the mounting shelf, follow this procedure:
1.
2.
3.
4.
On the rear of each rack rail, partially insert a mounting screw into the highest
hole specified in the MX960 Ethernet Services Router Hardware Guide for the large
shelf.
Install the large shelf on the rack. Hang the shelf over the mounting screws using
the keyhole slots located near the top of the large shelf flanges.
Partially insert screws into the open holes in the ears of the large shelf.
Tighten all the screws completely.
Step 2: Install the Mounting Hardware
Step 2: Install the Mounting Hardware
7