Keysight Technologies N9020A Installation Note page 47

Exa/mxa signal analyzer

Hide thumbs Also See for N9020A:

11.Refer to

Figure

34. Locate W43 in the Opt HL4 Cable Kit. This cable will be one of three that

have part number 8121-1401, but only W43 will be labeled "705" on one end and "18" on the

other. Connect the end labeled "705" to A16J705 on the A16 Reference Assembly. Route the

cable along the right side wall behind the A9 and A10 Input Attenuators and through the

cutout in the chassis between A9 and A12. Connect the other end to A3J18 on the A3 Digital IF

(DIF) Assembly.

Figure 34

W42 and W43 Cables

Installation Note N9010-90054

Installation Procedure

Table of Contents

N9010a