Keysight Technologies N9020A Installation Note page 20

Exa/mxa signal analyzer

Hide thumbs Also See for N9020A:

Installation Procedure

Rear Panel Removal

1. Refer to

Figure

8. Using the T-10 driver, remove the twenty screws (2) and (3) attaching the

rear panel (1) to the chassis. The rear panel can now be removed.

2. Use a 9/16-inch socket wrench to remove the nut securing the EXT REF IN connector from the

rear panel.

3. The rear panel can now be removed.

Figure 8

Rear Panel Removal

Installation Note N9010-90054

Table of Contents

N9010a