Keysight Technologies N9020A Installation Note page 19
Exa/mxa signal analyzer
Hide thumbs
Also See for N9020A:
- Installation note (9 pages) ,
- Installation note (12 pages) ,
- Installation note (50 pages)
Advertisement
2. Refer to
Figure
7. Pull the front frame carefully away from the chassis. Remove the ribbon
cable W1 from the A8 Motherboard.
W1 may have locking springs on each side. Depress the spring on each side of the connector to
remove from the motherboard.
Figure 7
Front Panel Cable
Installation Note N9010-90054
Installation Procedure
19
Advertisement
