Keysight Technologies N9020A Installation Note page 43

Exa/mxa signal analyzer

Hide thumbs Also See for N9020A:

2. Refer to

Figure

30. Pull the AIF/DIF assembly part way out of the chassis. Disconnect cables

W13, W14, and W15 from the AIF assembly.

Figure 30

AIF/DIF Assembly Removal

3. Discard cable W13.

4. The AIF/DIF assembly can be removed from the chassis by pulling straight out the back.

5. Locate the A2 Enhanced Analog IF (N9020-60290) and A3 40 MHz Digital IF (N9020-60165)

assemblies in the kit. Locate the W2 Cable Assembly, A2 to A3 (N9020-60046) in the kit.

6. Connect the W2 ribbon cable to J20 on the DIF (2).

Installation Note N9010-90054

Installation Procedure

Table of Contents

N9010a