Keysight Technologies N9020A Installation Note page 25

Exa/mxa signal analyzer

Hide thumbs Also See for N9020A:

Figure 12

Install Spacer

9. In the kit, locate the new A13W1 (E6607-21178) and A13W2 (E6607-21179) semi-rigid coax

cables and the new A13A1 (0955-2176) bandpass filter.

10.Refer to

Figure

13. Position the A13A1 on the table with the SMA connectors to the left and

right. Using the old A13A1/A13W1/A13W2 assembly as a guide, connect the new A13W1

(E6607-21178) the left SMA connector of the new A13A1. Connect the new A13W2

(E6607-21179) to the right SMA connector of the new A13A1.

Installation Note N9010-90054

Installation Procedure

Table of Contents

N9010a