Keysight Technologies N9020A Installation Note page 3

Option HL4, 40 MHz Analysis Bandwidth (B40) + Microwave Preselector Bypass (MPB) Upgrade Kit
Option HL4, 40 MHz Analysis Bandwidth (B40) + Microwave
Preselector Bypass (MPB) Upgrade Kit
Products Affected:
Serial Numbers:
Options:
To Be Performed By:
Estimated Installation Time:
Estimated Adjustment Time:
Estimated Verification Time:
a. To ensure that these newly installed options are functioning properly, the procedure that follows
includes the requirement of performing certain adjustments and performance verification tests.
However, the completion of these tests does not guarantee that the instrument meets all advertised
specifications.
Software and test equipment is required for making adjustments and for performance verification
testing.
Information on how to obtain this software can be found at:
www.keysight.com/find/calibrationsoftware
While Keysight does recommend that a full calibration be performed after the installation of this
upgrade, the end user must ultimately determine whether they want this service or not. If a full
calibration is required, arrangements regarding the level of calibration must be made between the
end user and the calibration provider.
Installation Note N9010-90054
N9010A, EXA Signal Analyzer
N9020A, MXA Signal Analyzer
N9010A, < MY/SG/US56480000
N9020A, < MY/SG/US52330000
B40, MPB
(X) Keysight Service Center
(X) Personnel Qualified by Keysight
( ) Customer
3.0 Hours
5.5 Hours
3.5 Hours
a
3