Operation: Standard Cycles; Before Getting Started; Selecting The Cycle; Start Cycle - Hanseatic HTW610D User Manual

Operation: Standard cycles

(1)
Baumwolle
Mix
Synthetik
Feinwäsche
Wolle
Jeans
Sportwäsche
Babybekleidung
Trommelreinigung

Before getting started

• First read chapter "Intended use" and
"Safety notices" (see page EN-3 and the
following).
• Remove the transport safety devices and
prepare the appliance as described in
chapter "Installation, connection and initial
commissioning" (see page EN-29).
• Properly attach the water inlet hose (28)
and the water outlet hose (19).

Selecting the cycle

NOTICE
Always select the cycle before loading
the washing machine. Otherwise the
loading sensor will not work.
The cycle table shows you the cycle which is
suitable for your laundry (see table "Standard
cycles" on page EN-11.
1. To switch on the appliance, press the
button (8)
The LEDs for the washing water tempera-
ture (2) and spin speed (3) of the current
cycle will light up.
2. If necessary, select another cycle using
the cycle selector (1).
Operation: Standard cycles
(2) (3)
Express15'
Schnell 45'
ECO 40-60
Intensiv
20°C
Spülen
Schleudern
Temp.
You can change the default values of the
selected cycle to suit the type of laundry
you are washing. See table "Cycle adjust-
ments" on page EN-15.

Start cycle

1. Open the tap completely.
2. Press the
The cycle starts.
The
appliance lid is now locked. After a short
time, you will hear the sound of water flow-
ing in or the drum moving.
Interrupting and continuing
the course of the cycle
We recommend only interrupting the cycle
for a brief period. Otherwise, the suds will
cool down and this will negatively impact the
washing result.
To
• interrupt the cycle, press the
The cycle stops. Noises, such as the drum
rotation, also stop.
• continue the cycle, press the
again.
Page EN-19
(6)
9H
6H
3H
3 Sek. drücken für Signal
Funktion
button (9).
LED (6) lights up to indicate that the
(8)
Ein/Aus
Start/Pause
(9)
button (9).
button (9)