Start Cycle; Interrupting And Continuing The Cycle; Adding Laundry - Hanseatic HWMK814B User Manual

You can change the selected cycle's
standard values in order to further adjust
them to your kind of laundry. See table "Cycle
adjustments" on page EN-17.

Start cycle

1. Open the tap completely.
(3)
Express 15'
Hygienepflege
ECO 40-60
Wolle
Spülen
Startzeit Zeit
Schleudern
sparen Temp/
-Vorwahl
Trommelreinigung
(a)
(i)
2. Press the (6) button.
The cycle starts as soon as the appliance
has determined the amount of laundry (ap-
prox. 1 minute).
The display (3) shows
– the current cycle phase (a)
– the symbol showing that the loading
door is locked
– the time remaining (i) for the cycle.
(6)
Verschmutzungs-
Ein/Aus
Start/Pause
U/Min/ Funktion
3 Sek. Tür
Entriegelung
Operation: Standard cycles
Interrupting and continuing
the cycle
We recommend only interrupting the cycle
for a brief period. Otherwise, the suds will
cool down and this will negatively impact the
washing result.
To
• interrupt the cycle, press the
The indicator for the remaining time (13)
will flash during the interruption.
• continue the cycle, press the
again.

Adding laundry

CAUTION
Risk of burns!
Improper handling of the appliance
can lead to burns.
■ The glass of the loading door can get
hot during operation. Do not touch
the glass when the appliance is run-
ning.
Risk of scalding!
Improper handling of the appliance
can lead to scalding caused by hot suds.
■ Never open the loading door with
force.
This function is only available at the begin-
ning of a cycle if the washing water level does
not go past the edge of the loading door.
1. Press the button (6) until the
bol disappears from the display (at least
3 seconds).
The loading door is now unlocked. The
drum has come to a stop.
2. Open the loading door, place the laundry
inside and close the door.
3. Press the button (6) to continue the cycle.
Page EN-21
button (6).
button (6)
sym-