Other Additional Functions; Start Time Pre-Selection; Button Lock (Child Lock - Hanseatic HWMK814A User Manual

Other additional functions

Start time pre-selection

The cycle usually starts as soon as you have
pressed the button (6). This appliance also
offers you the option to delay the start time.
Setting the start time preselection
3 Sek. drücken für Individuell/Signal
Startzeit Zeit
sparen Temp/ U/Min/ Funktion
-Vorwahl
(13)
The start time delay can be set in one-hour
increments. The maximum start time pre-se-
lection is 24 hours.
1. Select the desired cycle using the cycle
selector (2).
2. Press the 'Startzeit-Vorwahl' button (13).
The display (3) shows the indicator
and the delay time
1 h
cycle will start in one hour.
3. To extend the delay time, repeatedly
press the 'Start time pre-selection' button
until the display shows the desired delay
time.
button (6).
4. Press the
The cycle will start after the delay setting
has elapsed.
Terminate delay
• If you have already pressed the
ton, switch the appliance off with the
button (5).
• If you have not yet pressed the
press the 'Start time pre-selection' but-
ton (13) repeatedly until the display (3)
shows .
0 h

Button lock (child lock)

The button lock allows you to secure the
appliance from unwanted use. This stops a
standard cycle from being altered when not
desired and from being accidentally started
or stopped.
Verschmutzungs- Verschmutzungs- Verschmutzungs-
grad grad
Ein/Aus
Start/Pause
3 Sek. Tür
Entriegelung
•
•
(16)
, i.e. the selected
Switching the signal tones on
and off
(6) but-
button,
You can decide whether or not there should
be a beep when a button is pressed and
when the cycle ends.
•
Other additional functions
3 Sek. drücken für Individuell/Signal
Startzeit Zeit
sparen Temp/ U/Min/ Funktion
-Vorwahl
(10)
To activate the button lock, simultane-
ously press and hold the two buttons ously press and hold the two buttons
'U/Min/ 'U/Min/ ' (10) and 'Funktion' (9) until
appears in the display (3).
All operating controls are locked (excep-
tion: (5) button).
To switch off the button lock, press and
hold the two buttons 'U/Min/ hold the two buttons 'U/Min/
tion' simultaneously until the indicator in
the display goes out.
3 Sek. drücken für Individuell/Signal
Startzeit Zeit
sparen Temp/ U/Min/ Funktion
-Vorwahl
(11)
To change the current setting, press the
'Temp/ 'Temp/ ' button for 3 seconds. (11).
Page EN-25
Verschmutzungs- Verschmutzungs- Verschmutzungs-
grad grad
Ein/Aus
Start/Pause
3 Sek. Tür
Entriegelung
(9)
(22)
' and 'Funk-
Verschmutzungs- Verschmutzungs- Verschmutzungs-
grad grad
Ein/Aus
Start/Pause
3 Sek. Tür
Entriegelung