Ink Loader - Tektronix Phaser 600 User Manual

Ink loader

Clean the ink loader if you notice these symptoms:
Ink sticks do not fall when the slider(s) are pulled back.
Sliders do not move easily (sticking).
Ink loader jams.
Follow these steps to clean the ink
loader:
1 Open ink loader cover.
2 Remove any ink sticks that are
still in the ink loader. Use a pair
of tweezers or a sharp knife.
N O T E
If you need to remove the ink loader, first remove all ink sticks from the ink loader.
Refer to Removing the ink loader
1
for instructions.
5 6 5
O
C C A S I O N A L C L E A N I N G
2
9480-63